Grammer PRIMO EL Plus, Руководство по эксплуатации

Страница: 22 / 85

Safety instructions
22
GB
•
••
•
The driver's seat is not watertight and must be protected against splashes of water!
•
••
•
Any conversion or refitting work on a GRAMMER AG driver's seat must be performed ex-
clusively in authorized workshops by trained or suitably qualified personnel and in
adherence with the applicable operating, maintenance and installation instructions and in
compliance with all relevant national regulations.
• •• •
Improper installation and assembly bear the risk of bodily injury or property damage
and the proper function of the driver's seat or mounted parts can no longer be guaran-
teed.
• •• •
Before driving, you must check if all seat settings selected guarantee a safe operation
of the vehicle.
Connecting data
•
••
•
If you need to connect cables to the vehicle supply network, strictly observe the following
instructions:
Before you connect an electrical consumer fitted in the driver’s seat (e. g. the seat
heater or the seat ventilation), you must obtain the relevant electrical data for the respec-
tive vehicle with reference to voltage, protection and the kind of connections from the
manufacturer, from
GRAMMER AG or the company’s agencies.
For safety reasons, the installation and connection to the vehicle supply network must be
carried out by authorized specialist personnel only.
The seat connections must be protected independently of other vehicle components.
Protection Seat switch – Current carrying capacity
12V DC 10A Switch model: change-over contact
Switching power: 1W
Max. switching current: 0,1A
None of these parameters must be exceeded, not even
for a short term.
No inductive load admissible!
For building an electric connection, select an electric circuit by means of which the electric
consumers of the driver’s seat are separated from the live network when
the ignition is
switched off .