Gram KK 3400-10, Инструкция по эксплуатации, Страница: 9 / 20

9
OPERATION
Touch control sensor panel layout
Switching on the appliance
When the appliance is switched off then all
the cooking zones are disconnected and the
indicators are off.
Touch the on/off sensor field (1) to switch on
the appliance. „ 0 ” will appear on all cooking
zone displays
(3)
for 10 seconds. After selec -
ting a desired cooking zone by touching the
cooking zone selector sensor field (2) (see
„Setting the heating power”), now the desired
heat setting can be selected using the (+)(5)
or (-)(4) sensor fields .
If none of the sensor fields is touched within 10 seconds, the appliance swit -
ches itself off.
If child lock function is activated, the appliance cannot be switched on (see
„Releasing the child lock”).
Switching on the cooking zones
When the cooking surface is connected to
the electricity mains, the pilot light should
light up briefly above the child lock sensor
field (6) , after which the appliance can be
switched on.
No objects should be placed on the sensor fields (this could cause an error).
Touch sensor fields should be always kept clean.
After switching on the appliance using the
on/off sensor field (1) cooking zones can be
operated as follows:
1. Select the desired cooking zone using
the cooking zone selector sensor field (2) .
(Sensor field layout reflects the layout of
individual cooking zones),
6
4
3
3
2
1
5
4
2
1
5
.