Gram KK 3400-10, Инструкция по эксплуатации, Страница: 10 / 20

10
OPERATION
Setting the heating power
In order to set the heat setting, first select the
desired cooking zone using the cooking zone
selector sensor (2) . Then, when the cooking
zone display
(3)
shows “ ” start setting the
desired heat setting using the (+)(5) or (-)(4)
sensor field.
If you do not wish the automatic warm-up
function to operate, start the heat setting
selection by touching the (+)(5) sensor
field first. You can then gradually increase
the heat setting by operating the (+)(5)
sensor field, or lower the heat setting by
operating the (-)(4) sensor field.
If, however, you do wish to cook using
the automatic warm-up function, start
heat setting selection by touching the (-)
(4) sensor first. (see „Automatic warm-up
function”).
If none of the sensor fields is touched within 10 seconds then the cooking zone
switches off.
A cooking zone is active when „ ” is displayed on the cooking zone display. This
indicates a cooking zone is ready for the heat setting to be set or changed.
2. Set the desired heat setting using the (+)
(5) or (-)(4) sensor fields,
3. To change the heat setting again as
described in point 1, select the desired
cooking zone using the cooking zone
selector sensor field (2) , and then set the
desired heat setting using the (+)(5) or (-)
(4) sensor fields.
4
3
3
2
5
.
.