Gram KF 345, Инструкция по эксплуатации

Страница: 53 / 67

GB
53
Display of temperature setting: Press
TEMP and hold it down. After a moment or
two the display shows the temperature set-
ting, in this case the factory setting of +5°C.
When all lamps in the scale light up, the
temperature in the cabinet is + 9°C or high-
er than can be shown on the scale.
When the lamp under +2 lights up - and
only this lamp - the cabinet temperature is
lower than can be shown on the scale.
When the two lamps at either end of the
scale flash alternately and the four middle
lamps light up there is a fault in the tempe-
rature sensor. Call a service technician. (In
the event of sensor fault an emergency
program will take over control until the ser-
vice technician arrives).
Alarm: The lamps light up one after the
other along the scale, starting at the cold-
est end. An acoustic alarm is given at the
same time.
+2 I +9 TEMP.
+2 I +9 TEMP.
+2 I +9 TEMP.
+2 I +9 TEMP.
+2 I +9 TEMP.
+2 I +9 TEMP.
Normal condition. The panel shows the
actual freezer temperature, here -18°C.
Temperature setting: Press TEMP and
hold it down. In a moment or two the dis-
play will show the temperature setting, in
this case the factory setting of -18°C.
When all lamps in the scale light up, the
temperature in the freezer is -14°C or hig-
her than can be shown on the scale.
When the lamp under -21 lights up - and
only this lamp - the freezer temperature is
lower than can be shown on the scale.
When the two lamps at either end of the
scale flash alternately and the four middle
lamps light up there is a fault in the tempe-
rature sensor. Call a service technician. (In
the event of sensor fault an emergency
program will take over control until the ser-
vice technician arrives).
Alarm: The lamps light up one after the
other along the scale, starting at the col-
-21 I -14 TEMP. FREEZE
-21 I -14 TEMP. FREEZE
-21 I -14 TEMP. FREEZE
-21 I -14 TEMP. FREEZE
-21 I -14 TEMP. FREEZE
-21 I -14 TEMP. FREEZE
-21 I -14 TEMP. FREEZE
List of signals