Gram FS 3185-90, Руководство пользователя

Страница: 14 / 48

Heat
EN
User guide
Troubleshooting
If the appliance does not operate when
switched on then check;
• That the plug is inserted properly in the
socket and that the power supply is on. (To
check the power supply in the socket, plug
in another appliance)
• Whether the fuse has blown, the circuit
breaker has tripped or whether the main
distribution switch has been turned off.
• That the temperature control has been set
correctly.
• That the new plug is wired correctly, if you
have changed the fitted, moulded plug.
If the appliance is still not operating at all after
the above checks, contact GRAM service.
Please ensure that the above checks have
been carried out, as you will be invoiced for
the service visit if no faults have been found.
Energy Consumption
Maximum frozen food storage volume is
achieved without using the 5 upper drawers
(The bottom drawer must stay in the freezer)
in the freezer compartment. The energy
consumption of your appliance is based on
the freezer compartment being fully loaded
without using the 5 upper drawers (The
bottom drawer should be left in the freezer
compartment).
Practical advice concerning the reduction
of the electricity consumption
1. Make sure that the appliance is located in
well-ventilated areas, far from any heat source
(Cooker, radiator etc.). At the same time, the
appliance must be kept away from sunlight .
2. Make sure that the frozen food is placed in
the appliance as soon as possible, especially
during summertime. It is recommended to use
thermal insulated bags to transport the food
home.
3. Do not keep the door of the appliance open
more than necessary and make sure that after
each opening the door is well closed.
Information concerning the noise
and the vibrations which might
appear during the operation of the
appliance
1. The operation noise can increase during
the operation.
- In order to keep the temperatures at the
adjusted level, the compressor of the
appliance starts periodically. The noise
produced by the compressor becomes
stronger when it starts and a click can be
heard when it stops.
- The performance and operation features of
the appliance can change according to the
modifications of the temperature in the
surrounding environment. This must be
considered to be normal.
2. Noises like liquids flowing or as being
sprayed.
- These noises are caused by the flow of the
refrigerant in the circuit of the appliance and
comply with the operation principle of the
appliance.
3. Other vibrations and noises.
- The level of noise and vibrations can be
caused by the type and the condition of the
floor on which the appliance is placed. Make
sure that the floor does not have significant
level distortions and that it can yield to the
weight of the appliance (It is flexible).
- Another source of noise and vibrations is
represented by the objects placed on the
appliance. These objects must be removed
from the appliance.
7