Gram FH 100, Руководство по эксплуатации

Страница: 18 / 26

18
RESTORING THE FACTORY DEFAULT SETUP
1. Press the
key while pressing the key the display will show
“PrInT”.
2. Press the
key repeatedly until it reads
“InITIA”.
3. Press the
key to confirm, the display reads
“BUSY” and the returns
to weighing mode. Factory default setup is finished.
COMMUNICATION WITH A COMPUTER
The balance keyboard functions can be accessed via the RS-232 interface.
The following commands are available:
U – : units conversion
T – : tare function
C – : calibration with external standard weight
P – : print function
% - : percent function
# - : instant print
M – : counting function
When a balance is connected to a computer, it is suggested that immediate
print # be used. In response to this command the balance will transmit
whatever number or message appears on the balance display.
The string format output is shown below: