Gram FH 100, Руководство по эксплуатации

Страница: 13 / 26

13
3. Press the
key. Wait for the stable display, it reads
“100.000” or
“100.00”.
4. Remove the container with standard object. Put another same
container on the weighing pan, wait for the stable display, it reads
“0.000” or “0.00”.
5. Add the goal object in the container, wait for tyhe stable display, the
value displayed is the percentage the weight of the goal object varies
from the standard weight.
6. Press the
key to return to normal weighing mode.
7. If necessary, the weight of the goal object could be printed out.
WEIGHING UNITS
1. Press the key
to select the desired unit weight (g, oz, dwt) or
weighing mode (normal weighing, counting or percentage mode).
Enabling weighing units
The units function can be programmed to turn certain weighing units on or off.
To enable or disable certain units of measure, perform the following procedure.
1. Press the
key while pressing key, the balance reads
“PrInT”.
2. Press the
key repeatedly until it reads
“unIT”.
3. Press the
key, the display reads
“g yes” which means g available for use.
Press the
key to confirm. To disable
“g” as the unit, press the
key, then the display reads “g no”, press the
key to confirm.
4. Follow the steps above to enable or disable Oz, Ct or dwt as the unit of measure.