Gram Precision STZ-100, Руководство оператора

Страница: 9 / 24

Mode 2 “Auto” – The data will be transmitted automatically when the weight
placed on the pan is > 3d and the display reading is stable.
Mode 3 “Contin” – The data is continuously transmitted to the printer.
1. Press the key for 3 seconds.
2. The display will show the message “Unit”
3. Press the three times.
4. The display will show the message “Prt”
5. Press the to confirm.
6. The display will show the message “hAnd”
7. Press the key to select the desired mode: “hAnd”, “Auto" and “Contin”
8. Press the key to confirm the selected mode.
* Parameter of RS-232 interface:
Format of data:
Each 10BIT as a data, the format:
BIT1, BIT2, BIT3, ……….,BIT8, BIT9, BIT10
BIT1: start bit
BIT2----BIT9: data bit
BIT10: final bit
Baud rate: 9600 bps
GUARANTEE
This balance is guaranteed for one year from the delivery date. The guarantee
covers any fabrication defect of the material.
During this period, GRAM PRECISION covers the manpower and spare parts
costs for the reparation of the scale.
This guarantee does not cover the failures caused by an inappropriate use or
overload.
The guarantee does not cover the freight cost (transport) necessary to repair
the balance.
9