9/14
GrainPro
®
Moisture Meter Instruction Manual
MA4064RAD0918
5.4.2. Use the ARROW Keys (Up or Down) to
select the desired commodity.
5.4.3. Use the built-in measuring cups in the
upper part of the grinder to get an exact
amount of sample.
NOTE:
The number displayed after each
commodity (9 or 11) is the exact amount of sample
to be used. Refer to Application and Measuring
Ranges Table.
5.4.4. Put the sample commodity on the sampling
port. Position the cap on the grinder.
5.4.5. Rotate the cap clockwise until the 2 stop
pins lock.
5.4.6 Press ON/TEST Key to get the reading
(approximately after 15 seconds)
NOTE:
Left side %MC is the moisture content of the
sample while the %MC on the right side is
the average of the last 4 readings.
Symbol “Hi” means that the moisture
content is above upper limit.
Symbol “Lo” means that the moisture
content is below lower limit.
%MC Reading
Average
reading
