6/14
GrainPro
®
Moisture Meter Instruction Manual
MA4064RAD0918
3. COMPONENTS
COMPONENTS
DESCRIPTION / FUNCTION
3.1. Cap
Made of resistant plastic and grinder made of hardened galvanized
steel. Used for grinding and compression of sample grain.
3.2. LCD Display
2 line LCD display that shows the moisture content reading of the
sample commodity.
3.3. ON/TEST Button
This key is used to turn-on the Moisture Meter, to enter into a
specific mode, to confirm a selected command and to get the
moisture content reading of the sample commodity.
3.4. Arrow UP Key / Arrow DOWN
Key
This key is used to select the desired Mode, to select the
commodity to be measured and to increase or decrease the
calibration value.
3.5. ESC/ OFF Button
This key is used to change into other modes and to turn off the
Moisture Meter.
3.6. Brush
Used to clean the sampling port after using.
Figure 1. GrainPro
®
Moisture Meter
BRUSH
BATTERY
