LX_FR597-INS-LAB-RevE21 13
Heat and Massage Feature —
Install Seat Connector
Heat Only Feature —
Install Seat Connector
Insert
Seat
Connector
Here
Insert
Seat
Connector
Here
4. There is only one connection to make — push the seat connector firmly into the control
module until its locking tabs snap into place as shown above.
Connector Security Lock
5. If you need to replace the Hand Pendant, remove the small white connector security lock as
shown above.
6. Remove the tape holding the back flap. Lower the flap and seal the compartment by pressing
firmly around the edges of the back flap.
7. The Heat and Massage / Heat Only Unit is now ready for operation. Instructions for use follow.
s
NOTICE: Before rolling the recliner, ensure the power cord is unplugged from the AC outlet.
