APC-US-INS-LAB-RevC18 20
3.10.5 Using
Restraint Straps
Locate both ends of the restraint strap, on
either side of the chair. One will have a square
loop on the end, and the other will have hook
and loop fasteners (Figure 3-37). Slide the end
of the strap with the hook and loop fasteners
through the loop on the other strap (Figure
3-38). Pull out on the strap until the patient is
secure. Fold the hook and loop fastener end of
the strap back until it makes contact with the
mating hook and loop fastener on the strap
(Figure 3-39).
3.10.6 Installing
the Patient Tray
Using the push buttons underneath the tray,
lock the legs 90° to the tray prior to installing
(Figure 3-40). Check to make sure that the legs
are located in the same hole (Figure 3-41).
Insert the first leg into preferred socket on one
side of the patient, and insert second leg into
corresponding socket on other side (Figure
3-42). Adjust as necessary to best fit patient.
FIGURE 3-37
FIGURE 3-38
FIGURE 3-39
FIGURE 3-40
FIGURE 3-41
FIGURE 3-42
