APC-US-INS-LAB-RevC18 16
FIGURE 3-19
FIGURE 3-20
3.6 HYDRAULIC MODEL: INDEPENDENT FOOT SECTION OPERATION
3.6.1 Independent Operation
To adjust the foot section separately from
the back section, support the foot section
with one hand, pull out the release lever, then
turn it clockwise (Figure 3-17). Adjust the foot
section to the desired position and release the
lever.
3.6.2 Return to Chair Mode
To return the foot section to chair mode,
support the foot section with one hand, turn
the release lever counterclockwise and push
the release lever in (Figure 3-18). Adjust the
foot section until it locks into position.
3.7 ADJUSTABLE
FOOTREST
3.7.1 Repositioning the Footrest
The footrest has three positions: retracted,
lower, and upper. With the pan in the retracted
position, pull out on the handles on either side
of the pan (Figure 3-19). The footrest will drop
into the lower position.
To place the footrest into the upper position,
grasp the handles on both sides of the pan.
Tilt the pan up while lifting (Figure 3-19). Once
the pan is in the fully up position, tilt the
pan out until it locks into the upper position
(Figure 3-20).
To return the footrest to the retracted
position, tilt the pan up while letting it slide
down (Figure 3-19) into the lower standard
position. Continue tilting the footrest until it is
in the retracted position.
WARNING:
TIPPING HAZARD — Do not
stand on footrest — tipping may occur.
FIGURE 3-17
FIGURE 3-18
