Graf one2clean, Инструкция по использованию и установке

Страница: 18 / 48

4 . Assembling the set-up kit
16 / 44
4. Assembling the set-up kit
1. 2.
Unfold the scum board. Place the clamps on ei-
ther side of the folding edges. Insert the scum board into the upper shell. A
groove offsets in an off-centre position.
3. 4.
Fix the partition wall with the U-clamps. Continue assembling the Carat S tank according
to the installation instructions (seal, centring pins,
lubricant).
5. 6.
Place the upper shell with the scum wall on top of
the lower shell. Assemble the clamps for connect-
ing the upper and lower shells. Assemble the clamps for connecting the upper and
lower shells.