2
.
Safety
4 / 40
Danger notices
2.3
1.
To ensure safety, everyone who comes into direct contact with the system must note the content of
this documentation.
2.
The system must not be used for any purpose other than that described by the manufacturer.
3.
Local operating and safety requirements and legislation must be followed at all times, even if they
are not explicitly mentioned in these instructions. The same applies to environmental requirements.
4.
If the operator becomes aware of mistakes or dangers, the manufacturer or responsible mainte-
nance company must be informed immediately.
5.
Safety precautions must never be removed or bypassed during normal operation of the wastewater
treatment system. Safety precautions may only be temporarily bypassed or deactivated by the
maintenance fitter during repairs and maintenance.
6.
When working with chemical substances, contact with the chemicals should be avoided Before the-
se substances may be used, the instructions for use on the packaging must be read and followed.
7.
If the use of personal protective equipment (safety shoes, protective glasses, gloves, ear defenders,
etc.) is prescribed, ensure that they are used. Defective or damaged protective equipment must be
immediately replaced with fully functional equipment.
8.
Work on electrical equipment may only be undertaken by specialists.
9.
All safety and danger notices on the machine should always be kept fully legible.
10. Hot parts must not come into contact with explosive or highly flammable chemicals.
11. Do not put vessels containing liquids on electric switch cabinets; short circuits may occur if the liquid
is spilled.
12. The system must not be operated by anyone under the influence of alcohol or medication which lim-
its cognitive ability or ability to react.
13. The system must be de-energised before any maintenance or cleaning work takes place.
14. Other than for maintenance purposes, the system should always be left switched on, otherwise cor-
rect wastewater cleaning cannot be guaranteed.
