www.graf.info
15
/
32
Teleskop
Profildichtung
Rundkornkies
Schachtgehäuse
The telescopic dome shaft allows the tank to be adapted in a continuously variable manner to terrain
surfaces with between 700 mm and 1000 mm of soil cover (the telescope can be shortened by 250 mm
from below if necessary).
To assemble, the profile seal (closed circuit) (material EPDM) provided is inserted in the tank's sealing
groove and rubbed in with plenty of soft soap (do not used lubricants with a mineral oil base because they
will corrode the seal). The telescope is then greased, slid in and aligned to the terrain surface.
5.1
Drinking
water telescopic dome shaft
Important:
To prevent loads from being transferred onto the
tank, round-grain gravel
(max. grain size 8/16) is filled in
layers around the telescope
and is evenly compacted.
Damage to the tank dome
and telescope must be avoided
during this step.
The cover is then positioned and is sealed
to prevent entry by children. Tighten the threaded
connection on the cover so tightly that it cannot be
opened by a child!
For a professional installation of a
drinking water cover, the telescopic dome shaft must reach
about 20 cm above the ground level.
5.2
Drinking water lid
5.
Assembling - telescopic dome shaft
The drinking water telescope is provided with a
second lid that rests on top. This is also always placed
on the rim of the telescope to prevent any dirt entering
the tank, except when working in the tank.
The seal must be in place in the groove around the
entire circumference before the lower telescope lid is
positioned.
ATTENTION
: The upper drinking water lid serves only
as a protective cover and is
not safe to walk on
!
Telescope
Round-grain
gravel
Profile seal
Shaft case
