10
EN
•
While still holding down the „STEAM“button briefly press the „POWER“ button and release.
•
Release „STEAM“button.
•
This activates the programmability of the Steam Temperature.
•
The lights behind the „COFFEE“ and „HOT WATER“ buttons will start flashing.
Within 30 seconds press one of the flashing buttons depending on the required temperature adjust-
ment.
•
Up (+) a setting : Press „HOT WATER“
•
Down (-) a setting : Press „COFFEE“
When you have selected a new temperature setting the unit will sound a sequence of beeps to indi-
cate the new temperature setting.
To save your settings press and hold down the „STEAM“ button for 3 seconds. A single long beep will
sound to indicate your settings have been saved.
Steam Wetness or Steam Pump Rate
The steam pump rate of this unit has been pre-set. Modifying the steam pump rate enables you to
make the steam wetter or dryer and aids in the delivery of a powerful, dry steam - ideal for texturing
milk. The steam pump rate can be modified in flow rate increments up or down should it be desired.
To do this you need to follow the instructions below:
•
Switch off the unit.
•
Press the „HOT WATER“ button for 3 seconds.
•
While still holding down the „HOT WATER“button briefly press the „POWER“ button and release.
•
Release „HOT WATER“ button.
•
This activates the programmability of the steam pump rate.
•
The lights behind the „COFFEE“ and „STEAM“ buttons will start flashing.
