Grady-White Marlin 300, Руководство пользователя

Страница: 52 / 102

3 0 0 M
A R L I N
8–4
A
CCESSORY
O
UTLET
- 12 V
OLT
Three 12-volt outlets are installed on your 300. They are located in the port and starboard deck
wing inserts on the vertical surfaces in front of the cupholders and in the dinette area near the
stove. These outlets provide easily accessible power supplies for accessories such as cellular
phones and spotlights.
C
OMPASS
The compass is located at the helm station in direct view of the operator when navigating the
boat. Following the compass instructions included in the “Owners Packet” will help you make
compensation adjustments.
B
ILGE
P
UMP
W
ITH
F
LOAT
S
WITCH
Your boat is equipped with automatic float switches adjacent to the bilge pumps. A float
switch will enable the pumps to come on automatically if a significant amount of water
accumulates in the bilge. The float switches function independently of the battery select switches
and can activate the bilge pump with the battery select switches in the off position. The bilge
pumps are also equipped with switches at the helm. When a switch is in the “on” position, the
pump will run continuously. The pump should not be left on unless someone is monitoring the
system and can turn the pump off when the bilge is dry. When a switch is in the off position, the
pump is off unless activated by the float switch.
B
ILGE
P
UMP
L
OCATIONS
Your boat has two bilge pumps. One is located in the aft bilge and can be accessed through the
fold down rigging door behind the folding aft seat. The second is in the rigging area under the aft
berth. This pump can be reached through the lift out board under the center aft berth cushion.
H
IGH
B
ILGE
W
ATER
A
LARM
Your boat is equipped with a high bilge water alarm. Although some residual accumulation of
water in the bilge is normal, this alarm will alert you if water reaches a high level that could
impair operation of the boat or be damaging to equipment. It is activated by a float switch located
in the forward bilge. This float switch is separate from the bilge pump system and only activates
the high bilge water alarm. The alarm panel (pictured below) provides both audible and visual
alert signals. This panel is located inside the cabin near the AC/.DC panel. When activated, the
red light on the switch will be on and a high pitched tone similar to that of an in home smoke
detector will sound. This is the recommended position to leave this switch. With the audible alarm
off, the red light will be the only indication of a high water situation.
N O T I C E
These outlets cannot be used with a cigarette lighter.
C A U T I O N
To prevent damage to the bilge pump, do not run it dry for a prolonged period of time.
!