2 2 5 T
O U R N A M E N T
8–9
O
PERATION OF
H
EAD
F
EATURES
Portable Head Operation
1. The upper fresh water reservoir must be filled with water prior to use.
2. Compress the bellows pump located on the left corner of the toilet a few times to add water
to the bowl.
3. F
LUSH
the toilet by pulling the slide valve handle out (located on the front of the toilet).
4. Compress the bellows pump until the bowl is rinsed.
5. Close the slide valve handle by pushing it in fully.
Portable Head With Deck Pump-out (Optional)
For flushing instructions, follow the steps outlined under
“Portable Head Operation”
. To
empty the portable head reservoir by use of a deck pump-out, follow the instructions below.
1. Remove the cap from the deck pump-out fitting located on the deck forward and outboard of
the port console.
2. Connect a vacuum hose from a pump-out station to the deck fitting and run until the
reservoir is empty. Replace the cap on the deck pump-out fitting.
Portable Head With In-line Macerator (Optional)
For flushing instructions, follow the steps outlined under
“Portable Head Operation”
. There
are two ways to empty the portable head reservoir with this type of set-up. The waste may be
vacuumed out through the deck fitting or discharged through a seacock in the hull bottom. The
macerator pump is mounted beneath the rigging lid located between the two consoles.
• Using Deck Pump-out Fitting
1. Locate the Y-valve mounted on the forward wall inside the console. Place the Y-valve
handle in the deck pump-out position (handle pointed up).
2. Follow the steps outlined under
“Portable Head With Deck Pump-out (Optional)”
.
• Using Seacock (Overboard Discharge).
1. Locate the Y-valve mounted on the forward wall inside the console. Place the Y-valve
handle in the overboard discharge position (handle pointed down).
2. Open the head discharge seacock (handle in the vertical position). This seacock is located
forward of the water tank and can be reached through the access plate in the water tank lid.
3. Turn “ON” the head pump switch at the helm and discharge until the reservoir is empty.
Close the discharge seacock (handle in the horizontal position).
Reference
“Portable Head Options” on page 8–19
for layout diagram.
C A U T I O N
Overboard discharge seacock must be sealed and secured in the closed position in accordance
with the laws in your boating area.
!
