2 8 3 R
E L E A S E
8–4
A
CCESSORY
O
UTLET
- 12 V
OLT
The two 12-volt outlets in the corners under the console overhang on both sides provide easily
accessible power supplies for accessories such as cellular phones and spotlights.
C
OMPASS
The compass is located at the helm station in direct view of the operator when navigating the
boat. Follow the compass instructions provided in the “Owners Packet” to make compensation
adjustments.
B
ILGE
P
UMPS
W
ITH
F
LOAT
S
WITCHES
Your boat is equipped with automatic float switches on the bilge pumps. This will enable the
bilge pumps to come on automatically if a significant amount of water accumulates in the bilge.
The switches are wired directly to the batteries and should be inspected frequently to ensure
proper operation. The float switches function independently of the battery select switches and can
activate the bilge pumps with the battery select switches in the off position. The pumps are
equipped with switches at the helm. When the helm switch is in the manual position, the pump
will run continuously. The pump should not be left in the manual mode unless someone is
monitoring the system and can turn the pump off when the bilge is dry.
B
ILGE
P
UMP
L
OCATIONS
The aft bilge pump is located under the motorwell access plate forward of the transom. The
forward bilge pump is located under the poly cover board with access plate inside the console
under the helm. It can reached through the lower rigging door in the head compartment.
S
HOWER
S
UMP
P
UMP
The shower sump pump pumps water from the shower floor overboard. This unit is located
under the poly cover board inside the console under the helm.
R
IGGING
C
OMPARTMENT
The rigging compartment is located aft of the fuel tank compartment. This enclosure is used
for rigging ignition protected accessories and for better passage to the rigging components located
aft of this compartment.
N O T I C E
These outlets cannot be used with a cigarette lighter.
C A U T I O N
To prevent damage to the bilge pump, do not run it dry for a prolonged period of time.
N O T I C E
The rigging hatch and mounting screws are sealed with silicone sealer after rigging is complete. If
the lid is removed it must be resealed to insure watertight integrity.
!