Grady-White Boats Marlin 300, Руководство пользователя

Страница: 67 / 112

3 0 0 M
A R L I N
8–7
S
EACOCKS
Ball valve seacocks are installed on the thru hulls for the livewell, washdown, air/cooler
pumps, generator systems and some head features. It is necessary for the seacocks to be in the
“open” position for operation. The “open” position is identified by the orientation of the handle. If
the handle is in line or parallel to the body of the valve, the seacock is in the “open” position. If
the handle is perpendicular to the body of the valve, the seacock is in the “closed” position. For
seacocks with remote arms installed, the “open” position can be obtained by pulling up on the
remote arm attached to the seacock handles. Pushing down on the remote arm closes the seacock.
T
RANSDUCER
F
LATS
The inverted transducer flats are designed primarily for a bronze style torpedo-shaped
transducer. An example of a torpedo shaped unit would be an Aero Mar Tri-Transducer. This
transducer is approximately ¾” thick. This thickness allows the transducer face to protrude below
the bottom of the hull. An additional ½” spacer may be installed between the hull bottom and the
transducer for optimum results. The transducer should be installed as far forward on the flat as
possible, and parallel with the keel.
W
INDSHIELD
W
ASHER
V
ALVE
A valve located in the forward wall of the deckwing controls your windshield washer. Water
will be sprayed on the windshield, by opening this valve with the Fresh Water System pressurized.
To pressurize, locate the water pressure switch on your boat’s AC/DC panel, and place it in the
“on” position.
C A U T I O N
All seacocks should be in the “closed” position if not in use or if the boat is unattended to prevent
the taking on of water if a plumbing component fails.
N O T I C E
A flush mount style transducer will not work with the inverted flat.
!