![Grady-White Boats Freedom 307 Скачать руководство пользователя страница 67](http://html.mh-extra.com/html/grady-white-boats/freedom-307/freedom-307_owners-manual_2253692067.webp)
F
R E E D O M
3 0 7
8–15
P
OWER
A
SSIST
H
YDRAULIC
S
TEERING
The engine ignition switches must be on for this system to function. The power assist
hydraulic pump is activated simply by turning the steering wheel. The hydraulic pump senses the
motion of the hydraulic fluid from the helm and pumps fluid in the cylinders at the engine
accordingly. The power assist pump is installed in the starboard console rigging compartment.
Over-current protection is provided by a 50A fuse located on the positive terminal of battery bank
#2. This system is compatible with multiple steering stations and the use of an autopilot. Refer to
the owner’s manual in your owner’s packet for more information.
R
EFRIGERATOR
The thermostat knob inside the refrigerator must be on for the refrigerator/freezer to operate.
The manually operated thermostat is located inside on the right upper rear wall. The thermostat is
turned clockwise to reduce the temperature and counterclockwise to increase the temperature.
To turn off the refrigerator, rotate the thermostat counterclockwise until it reaches “0”
position. Note that there will be resistance at this on/off position and the knob will need to be
pushed in while turning to “0”.
S
HORE
P
OWER
The shore power feature allows the use of AC equipment on board the boat. This equipment
includes any permanently installed appliances such as a battery charger, inverter charger, grill or
air conditioner. The shore power is utilized by connecting a heavy-duty cable, supplied with the
boat, to an appropriate external power source. This cable provides power to the boat’s AC inlet
that is wired to the AC panel. The AC panel allows for distribution to the battery charger, grill and
air conditioner. See the
“AC Inverter Schematic” on page 8–29
Connecting The Shore Power
1. Verify that the external power source is a 3 wire grounded system with amperage and
voltage ratings compatible with the boat’s AC system ratings.
2. Be sure there is sufficient cable length to allow for normal movement between the boat and
the dock.
3. Turn all AC panel switches to the “off” position. Turn the circuit breaker under the starboard
gunwale to off. Turn the circuit breaker at the dock outlet to off.
4. Connect the shore power cable at the boat inlet first.
5. Connect the shore power cable at the dock outlet and turn the dock outlet circuit breaker to
“on”.
6. Turn the circuit breaker under the starboard gunwale to the “on” position. Note: Test circuit
breaker monthly by pressing the test button and then resetting.
C A U T I O N
Always disconnect the shore power cable if leaving the boat unattended for an extended period of
time.
!
Содержание Freedom 307
