Grady-White Boats Freedom 307, Руководство пользователя

Страница: 61 / 91

F
R E E D O M
3 0 7
8–9
S
EACOCKS
Ball valve seacocks are installed on the thru hulls for the livewell, washdown, air/cooler
pumps, generator systems and some head features. It is necessary for the seacocks to be in the
“open” position for operation. The “open” position is identified by the orientation of the handle. If
the handle is in line or parallel to the body of the valve, the seacock is in the “open” position. If
the handle is perpendicular to the body of the valve, the seacock is in the “closed” position. For
seacocks with remote arms installed, the “open” position can be obtained by pulling up on the
remote arm attached to the seacock handles. Pushing down on the remote arm closes the seacock.
S
LIDING
L
OUNGE
S
EAT
The lounge seat includes an aft facing sliding seat bottom. This allows for the seat to be
adjusted to supply more seating area for passengers when extended or maximize cockpit space
when retracted. The switch for this seat is located in the port deckwing insert.
S
TEREO
The stereo is a marine AM/FM receiver with an integrated iPod®/iPhone dock and a
Bluetooth® adapter. A Sirius satellite radio tuner and antenna may be installed in lieu of the
Bluetooth® adapter upon request. It is located in the port deck wing with one speaker directly
below it, another in the starboard deck wing, two in the bow and two located under the port and
starboard gunwales in the cockpit. There is an amplifier that operates the two speakers under the
gunwales and is located behind the port deckwing insert. If the boat is equipped with a hardtop,
the speakers from the port and starboard deck wings will be located in the hardtop. The unit can
be remotely operated with two touch pads mounted at the helm station and at the shelf under the
gunwale on the port side of the cockpit. Refer to the stereo’s operation and maintenance manual in
your owner’s packet for specific instructions on using this unit. See
“Stereo System Layout” on
page 8–27 for a drawing showing the stereo system.
T
RIM
T
ABS
Trim tabs are electrically and hydraulically operated. The trim tab system includes a hydraulic
pump, a switch with an integrated indicator, and an auto-retract feature. The switch controls the
pump which lowers and raises the trim tabs. The indicator keeps you constantly aware of the trim
tab’s position. The auto-retract feature automatically raises the tabs every time the ignition switch
is turned off.
C A U T I O N
All seacocks should be in the “closed” position if not in use or if the boat is unattended to prevent
the taking on of water if a plumbing component fails.
C A U T I O N
To prevent damage to the deck floor, do not activate the sliding seat bottom while a passenger is
sitting on the seat.
!
!