Grady-White Boats CANYON 366, Руководство пользователя, Страница: 70 / 116

3 6 6 C
A N Y O N
8–8
AC/DC P
ANEL
The 366 Canyon AC/DC panel is located on the aft wall of the cabin. AC and DC powered
switches are noted below. See “120 Volt AC Wiring One-Line Diagram” on page 8–37 for a
wiring diagram.
AC P
OWERED
A
CCESSORY
S
WITCHES
Either the optional generator must be running or the dockside power cord must be connected
to shore and the circuit breaker, located under the aft starboard gunwale, must be in the “on”
position to allow these auxiliary switches to operate. See
“120 Volt AC Wiring One-Line
Diagram” on page 8–37 and “120 Volt AC Accessory Locations” on page 8–36.
• Main Power Switch or Transfer Breaker with Generator
The main power switch, located at the top of the AC panel, must be in the “on” position to
distribute power to the following accessory switches.
• Outlet Switch - cabin
This switch activates the GFCI cabin outlet. See “120 Volt AC Accessory Locations” on
page 8–36 for more details about the outlets.
C A U T I O N
220V AC presents a high voltage shock hazard. All power supplies should be turned off and
disconnected before accessing the wiring behind the AC panel. Service to the AC wiring should be
performed by a qualified marine electrician.
!