Grady-White Boats CANYON 366, Руководство пользователя, Страница: 67 / 116

3 6 6 C
A N Y O N
8–5
starboard switch and position “2” on the port switch so that both battery banks will charge
simultaneously with the engines running. If the boat has triple engines, the center switch may be
set in position “1” or “2”. For emergency situations when neither battery bank alone will start the
engines, select “1 + 2” on each switch. Return the switches to normal operation settings after
starting the engines.
B
ILGE
P
UMP
W
ITH
F
LOAT
S
WITCH
Your boat is equipped with automatic float switches adjacent to the bilge pumps. A float
switch will enable the pump to come on automatically if a significant amount of water
accumulates in the bilge. The float switches function independently of the battery select switches
and can activate the bilge pump with the battery select switches in the “off” position. The bilge
pumps are also equipped with switches at the helm. When a switch is in the "on" position, the
pump will run continuously. The pump should not be left in the "on" mode unless someone is
monitoring the system and can turn the pump off when the bilge is dry. When a switch is in the
“off” position, the pump is off unless activated by the float switch.
B
ILGE
P
UMP
L
OCATIONS
Your boat has two bilge pumps. One is located in the aft bilge rigging area and can be
accessed through the aft rigging lid beneath the access panel in the generator subfloor. The second
is in the forward bilge beneath the sole floor lid and can be accessed through the access plate in
this lid.
C
OMPASS
The compass is located in the instrument panel at the helm station in direct view of the
operator when navigating the boat. Following the compass instructions included in the “Owners
Packet” will help you make compensation adjustments.
W A R N I N G
Never turn the battery select switch to the “off” position with an engine (including generator)
running as this could damage the engine charging system or the diesel generator’s control panel.
C A U T I O N
To prevent damage to the bilge pump, do not run it dry for a prolonged period of time.
!
!