7
USING THE
STUDIOVISION MONITOR
REMOVING THE MONITOR FROM THE FLIGHT CASE
1. Remove the V-mount battery, or unplug the AC power adapter.
2. Set the monitor face-up on a flat surface.
3. Use an M5 hex key (not included) to remove the four mounting
screws.
4. Lift the monitor out of the case by the front handles.
VESA MOUNT
The monitors are equipped with 75 × 75 and 100 × 100 VESA
mounting holes. Refer to your VESA mount’s weight capacity
specifications to ensure that it will securely support the monitor.
To mount the monitor on a VESA mount, follow these steps:
1. Remove the V-mount battery, or unplug the AC power adapter.
2. Remove the monitor from its flight case.
3. Unscrew the four V-mount plate screws, and remove and unplug
the V-mount plate.
4. Unscrew the four sub-plate screws, and remove the sub plate
from the monitor.
5. Use the screws that are included with your VESA mount to
attach the monitor to the mount.
Important:
VESA screws should screw in snugly. But if the screw
meets some resistance, don't force it in. Doing so may damage the
monitor.
