Repair
311762ZAP
15
Reassembly
To reassemble the built-in filter:
NOTE:
Lubricate all o-rings before installation.
1. Install o-rings (22*, 25*) onto bottom filter cap (26).
Then use wrench to reassemble and tighten bottom
filter cap. Torque to 40-60 ft-lb (52-82 N•m).
2. Reassemble o-ring (59*) onto top filter cap (20).
Install strainer (23), and filter support (24) in top
filter cap. Then use wrench to install and tighten top
filter cap. Torque to 40-60 ft-lb (52-82 N•m).
NOTE:
36cc through 115cc Xtreme pump lowers no
longer use the short filter screens (23) or supports (24).
See page 31 for details.
NOTICE
To prevent leaking, ensure that the proper repair
components are used for the appropriate series
pump. See
for more information.
TI8294a
26
25*
22* thin
medium
TI8402a
TI8464a
20
24
59*
23
thick
pin faces
up
slot is on bottom
open end
down
pin hole
faces up