Graco ToughTek F680e, Инструкция по эксплуатации

Страница: 15 / 54

Grounding
Grounding Grounding Grounding
The equipment must be grounded to reduce the
risk of static sparking and electric shock. Electric
or static sparking can cause fumes to ignite or
explode. Improper grounding can cause electric
shock. Grounding provides an escape wire for the
electric current.
The system is grounded through the power cord.
Setup Setup Setup
1. Ground sprayer. See Grounding, page 15 .
2. Check Throat Seal Liquid (TSL) level in packing
nut (D). Fill 1/2 full with TSL.
3. Connect air supply to applicator.
4. Attach fluid hose (ZZ) to applicator fluid inlet and
fluid outlet (B), then secure Velcro straps (V)
around the cam lock fitting.
5. Turn hydraulic pressure control knob (S)
counterclockwise to lowest pressure.
(-)
WWLL DD
6. Set pump control switch (AA) to OFF.
WWLL DD
7. Turn main power disconnect (DD) OFF.
Connect unit to power source (see
Attach Power Cord, page 14 ).
WWLL DD
8. Flush the system with water before using (see
Flush, page 16 ). When finished, pump out the
excess water from the hopper (N).
3A3110K 15