Operation
3A6393D
11
Operation
Setup
1. Turn the motor power switch (S) to OFF.
the power cord into a dedicated 15 amp, 120 V
circuit (or a 10 amp, 230 V circuit, depending on
model).
3. Check Throat Seal Liquid (TSL) level in packing nut
(D). Fill 1/2 full with TSL.
4. Connect air supply to applicator.
5. Attach hose to applicator fluid inlet and pump fluid
outlet (F), then secure Velcro straps (V) around the
cam lock fitting.
6. Flush the system with water before using (see
on page 12).
To avoid tipping over, make sure the cart is on a flat
and level surface. Failure to do so could result in
injury or equipment damage.
WLD
S
WLD
'
WLD
V
F
