4 Securing
Child
56
4. Pull All the Slack
Out From Around
the Waist
Pull up on the harness
strap while pushing the
chest clip down. Do this
to both sides.
5. Tighten the Harness
by Pulling the
Harness Adjustment
Strap
When you are not able
to pinch any of the
harness webbing at
your child’s shoulder,
the harness is tight
enough.
A snug harness should not allow any slack. It lies in a
relatively straight line without sagging. It does not press
on the child’s flesh or push the child’s body into an
unnatural position.
Содержание SnugRide SnugLock 30
Страница 2: ...A secure install in 3 quick easy steps 1 2 3 ...
Страница 77: ...7 Accessories 73 If your model does not include a body support you can use a rolled towel as shown ...
Страница 79: ...8 Care Cleaning 75 4 Pull Out the 4 Plastic Flaps from Sides of Seat ...
Страница 83: ...79 NOTES ...