Graco saniforce 1590, Запасные части

Страница: 12 / 32

Repair
Check Check Check Valve Valve Valve Repair Repair Repair
NOTE: NOTE: NOTE: Kits are available for new check valve
flappers, or check valve balls in a range of materials.
Gasket kits also are available.
Disassemble Disassemble Disassemble Ball Ball Ball Check Check Check Valves Valves Valves
1. Follow the Pressure Relief Procedure, page 9 .
Disconnect all fluid and air lines.
2. To drain the pump, pull the frame quick-release
pins (207) and rotate the pump.
NOTE: NOTE: NOTE: After draining, rotate the pump to
positions which will aid disassembly.
3. Remove the clamps (23) on the outlet manifold
(17) and remove the manifold.
NOTE: NOTE:
NOTE: Use care while removing manifolds to
avoid damage to check valve components.
4. Remove remaining clamps (23), manifolds (16,
17), gaskets (18), and check valves (19, 20).
5. Clean and inspect gaskets, balls, ball stops, and
seating surfaces for any damage and replace as
necessary.
6. To continue with diaphragm disassembly, see
Disassemble the Standard Diaphragms, page 14 .
12 3A6781D