Graco RTX2000 Скачать руководство пользователя страница 3

Warnings

3A7026A

3

WARNING

FIRE AND EXPLOSION HAZARD

 

Flammable fumes, such as solvent and paint fumes, in work area can ignite or 

explode. To help prevent fire and explosion:

Do not spray or clean with flammable materials. Use water-based materials only.

Use equipment only in well-ventilated area.

Sprayer generates sparks. When flammable liquids are used near the sprayer, 

keep sprayer at least 20 feet (6.1 meters) away from explosive vapors.

Keep work area free of debris, including solvent, rags and gasoline.

Ground all equipment in the work area. See 

 

instructions.

Keep a working fire extinguisher in the work area.

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

Always wear appropriate gloves, eye protection, and a respirator or mask when 

painting.

Do not operate or spray near children. Keep children away from equipment at all 

times.

Do not overreach or stand on an unstable support. Keep effective footing and 

balance at all times.

Stay alert and watch what you are doing.

Do not operate the unit when fatigued or under the influence of drugs or alcohol.

Do not kink or over-bend the hose.

Do not expose the hose to temperatures or to pressures in excess of those 

specified by Graco.

Do not use the hose as a strength member to pull or lift the equipment.

Do not spray with a hose shorter than 25 feet.

Do not alter or modify equipment. Alterations or modifications may void agency 

approvals and create safety hazards.

Make sure all equipment is rated and approved for the environment in which you 

are using it.

BURN HAZARD

Equipment surfaces and fluid that is heated can become very hot during operation. 

To avoid severe burns:

Do not touch hot fluid or equipment.

ELECTRIC SHOCK HAZARD

This equipment must be grounded. Improper grounding, setup, or usage of the 

system can cause electric shock.

Turn off and disconnect power cord before servicing equipment.

Connect only to grounded electrical outlets.

Use only 3-wire extension cords.

Ensure ground prongs are intact on power and extension cords.

Do not expose to rain. Store indoors.

Содержание RTX2000













Отзывы: