background image

ProMix Web Interface 

8

311191C

Web Navigation Screens

From the main screen (see F

IG

. 7) the operator can 

select Setup, Reports, or Software Resets.

Setup

Download setup values - saves the ProMix 
configuration to the PC. This file can be opened and 
edited using Microsoft Excel, or used to set up multiple 
systems.

Restore setup values - allows files to be uploaded and 
restored to the ProMix.

Display setup values - indicates what values are 
currently being used for the system. Allows the operator 
to verify that the right values are being used. See F

IG

. 8.

Download custom language - saves the current 
system language to the PC. This file is opened and a 
custom language added to the B column of the Excel 
file. See F

IG

. 9.

 Custom languages are limited to Ascii and Ascii 

extended characters and a maximum of 32 characters. 
Save the Excel file as a tab delineated file for uploading 
purposes.

Restore custom language - allows the custom lan-
guage file to be uploaded to the ProMix.

End current job - ends a job and adds material to 
usage report.

Software Resets

Install EasyKey software - downloads the Graco 
provided software to the PC (approximately 5 minutes). 
Once complete the control panel will be reprogrammed 
from the EasyKey.

Reset settings - places system back to factory default 
mode.

Reset password - clears password if lost or forgotten.

Advanced Configuration

To change IP settings, type in 192.168.0.1\config.html. 
Or use the freeware configuration program available 
from 

www.lantronix.com/device-networking/utili-

ties-tools/device-installer.html

.

F

IG

. 8 Display Set up

Data for Display setup values

TargetRatio0          10
TargetRatio1          10
TargetRatio2          10
TargetRatio3          10
TargetRatio4          10
TargetRatio5          10
TargetRatio6          10
TargetRatio7          10

F

IG

. 9 Download Custom Language

Save In

bin

File Name:

Files of Type:

Download custom language

Combined_2_00_006.REC

vssver.scc

All Files

Combined_2_00_007.rec

vssver.scc

DisplayBoard_2_00_

Combined_2_00_008.rec

DisplayBoard_2_00_004.rec

DisplayBoard_2_00_005.rec

DisplayBoard_2_00_006.rec

DisplayBoard_2_00_007.rec

Содержание ProControl























Отзывы: