Spray Tip Selection Charts
32
3A8553A
Spray Tip Selection Charts
AXP Series Precision Spray Tips (AXPxxx): AXP tips
are single orifice spray tips with precise pattern sizes for
automatic spray applications.
AXF Fine Finish Pre-Orifice Spray Tips (AXFxxx):
AXF tips have a pre-orifice that assists in atomizing
sheer thinning materials, including lacquers.
Order desired tip (Part No. AXPxxx or AXFxxx) where
xxx is the size code for the chart.
AXP Spray Tips
To reduce the risk of injury, including skin injection:
•
Follow the Pressure Relief Procedure, page
before removing or installing a spray tip or air cap.
•
Never exceed the maximum working fluid
pressure for your gun model.
Orifice Size
in. (mm)
* Fluid Output, fl oz/min (lpm)
Maximum Pattern Width at 12 in. (305 mm)
Pattern Width Tol/- 0.5 in. (13.0 mm)
at 600 psi
(4.1 MPa, 41 bar)
at 1000 psi
(7.0 MPa, 70 bar)
5 (127)
7 (178)
9 (228)
11 (279) 13 (330) 15 (381) 17 (432)
Size Code (Spray Tip Part No.)
† 0.009 (0.229)
7.0 (0.2)
9.1 (0.27)
209
309
409
509
---
---
---
† 0.011 (0.279)
10.0 (0.3)
13.0 (0.4)
211
311
411
511
611
---
---
0.013 (0.330)
13.0 (0.4)
16.9 (0.5)
213
313
413
513
613
713
---
0.015 (0.381)
17.0 (0.5)
22.0 (0.7)
215
315
415
515
615
715
815
0.017 (0.432)
22.0 (0.7)
28.5 (0.85)
---
317
417
517
617
717
817
0.019 (0.483)
28.0 (0.8)
36.3 (1.09)
---
---
419
519
619
719
---
0.021 (0.533)
35.0 (1.0)
45.4 (1.36)
---
---
421
521
621
---
---
* Tips are tested in water.
† Tip sizes include a tip gasket with 150 mesh tip filter. See AXP and AXF Spray Tip Gasket Assembly and Kits,
page
Measured with NO airflow. Air assist will tend to reduce pattern lengths by 1 in. to 2 in.
Fluid output (Q) at other pressures (P) can be calculated by this formula: Q = (0.041) (QT)
where QT = fluid
output (fl oz/min) from the above table for 600 psi.
P
