Graco PD349423D 10/17, Инструкция по эксплуатации

Страница: 44 / 96

44
3 Rear Facing
7. Lock Vehicle Seat Belt
In most vehicles today, slowly pull the
shoulder belt all the way out and then
let it go back in. You will hear a clicking
sound. Slowly pull out on the belt and
it should be locked. If not, review your
car’s owner manual and section 8-D.
8. Tighten the Vehicle Seat Belt
Press down firmly in the center of the car
seat. Pull on the shoulder belt to tighten
while feeding the slack back in the retractor.
Review your vehicle’s owner manual for vehicle seat belt use
6. Route the Vehicle Seat Belt
Thread vehicle seat belt through the
rear-facing belt path (marked with a blue
label) and out the other side. Buckle
it. The seat belt should lie as flat as
possible and not be twisted.
Note: It may be easier to route the
vehicle seat belt by lifting seat pad up to
expose the belt path.
Make sure the vehicle seat belt is in
front of the buckle strap when the buckle
is in the inner-most position, and in
behind when in the outter-most position.