Graco PD269300A, Инструкция по эксплуатации

Страница: 14 / 96

14
REAR-FACING INSTALLATION WITH LATCH
1
7
6
5
4
3
2
LATCH belt must be routed through opening in
child restraint for rear-facing mode.
SEEPAGE fig. d
Belt must lay flat and not be twisted.
Adjust child restraint to recline position
(see fig. a ANDPAGE fig. g 0LACE
rear-facing
ONVEHICLESEATEQUIPPEDWITH
LATCH anchors.
&OREASEOFINSTALLATIONEXTEND LATCH belt to its
MAXIMUMLENGTH
(OOKCONNECTORSTOVEHICLELOWERANCHORS
(fig. b) . Pull connectors to be sure they are
securely attached to the anchor points. (fig. c) .
0RESSDOWNlRMLYINCENTEROFCHILDRESTRAINT
while pulling LATCH adjustment belt. (fig. d) .
0ULLFRONTTOBACKANDLEFTTORIGHTATBELTPATH
TOCHECKFORSECUREINSTALLATION
(fig. e)
4HE
CHILDRESTRAINTSHOULDNOTMOVESIDETOSIDEOR
FORWARDMORETHANINCHCM
#HECKTHATTHELOWERANCHORAGEBELTSTAYS
tight and does not slip from the tightened
position. If it does not stay tight, try another
SEATINGPOSITIONORCONTACT#USTOMER3ERVICE
#HECKLEVELINDICATORONCHILDRESTRAINT
Vehicle must BEONLEVELGROUND and child in
CHILDRESTRAINTWHENCHECKINGLEVELINDICATOR
Ball MUST be entirely in blue zone (fig.f) . If
necessary, place rolled towels under child
RESTRAINTATVEHICLESEATCREASEUNTILENTIREBALL
ISINBLUEZONE4HENRECHECKLEVELINDICATOR
SEEPAGES
fig. c
DO NOT use tether rear-facing 4ETHER must
BESTOREDSEEh4ETHER3TORAGEvPAGE
0ERFORMTHISTESTEVERYTIMEYOUDRIVEWITHYOUR
child.