2
307043
Table of Contents
Warnings
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Air Motor Service
6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts Drawings and Lists
Model 207546
10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Model 206955
12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Models 205997, 215363, 945972 and 222791
14
. . . .
Accessories
16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensional Drawings
17
. . . . . . . . . . . . . . . . . . . . . . . . .
Mounting Hole Layouts
17
. . . . . . . . . . . . . . . . . . . . . . . . .
Technical Data
17
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Graco Standard Warranty
18
. . . . . . . . . . . . . . . . . . . . . .
Graco Phone Number
18
. . . . . . . . . . . . . . . . . . . . . . . . . .
Symbols
Warning Symbol
WARNING
This symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.
Caution Symbol
CAUTION
This symbol alerts you to the possibility of damage to
or destruction of equipment if you do not follow the
instructions.
WARNING
INSTRUCTIONS
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.
D
This equipment is for professional use only.
D
Read all instruction manuals, tags, and labels before operating the equipment.
D
Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor.
D
Do not alter or modify this equipment.
D
Check equipment daily. Repair or replace worn or damaged parts immediately.
D
Do not exceed the maximum working pressure of the lowest rated component in your system. This
equipment has a 180 psi (12 bar, 1.2 MPa) maximum incoming air pressure.
D
Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the Tech-
nical Data section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.
D
Do not use hoses to pull equipment.
D
Route hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose
Graco hoses to temperatures above 180
_
F (82
_
C) or below –40
_
F (–40
_
C).
D
Wear hearing protection when operating this equipment.
D
Do not lift pressurized equipment.
D
Comply with all applicable local, state, and national fire, electrical, and safety regulations.
