LL250 Compressor Installation
20
332230T
14. Start two set screws (7) into second coupler (8).
Slide coupler (8) over flex insert (9). Coupler (8)
should stay in position, if not it may need to be held
until the next step.
15. Ensure keyway on coupler shaft (15) is on top,
rotate as necessary. Place second key (6) in
keyway of coupler shaft (15). Align keyway in
coupler (8) to receive coupler shaft (15) and key (6).
Aligning all four studs (16) with associated vertical
slots, slide compressor assembly (17) into
mounting bracket so that coupler shaft (15) inserts
into coupler (8), ensure key (6) stays in place. Install
four washers (18) and four nuts (19) onto four studs,
tighten until slightly loose to allow for vertical
adjustment.
Содержание LineLazer 200DC
Страница 31: ...Notes 332230T 31 Notes ...
Страница 32: ...Parts Model 25R268 32 332230T Parts Model 25R268 ...
Страница 34: ...Parts Model 25R270 34 332230T Parts Model 25R270 ...
