309404
8
Engine
Removal
1.
Fig. 6. Remove cap screw (129), lock nut (130)
and coupler guard (125).
2.
Remove set screw (A) from flexible coupling (34).
3.
Fig. 5. Disconnect all necessary wiring.
4.
Remove four cap screws (70) and washers (71).
5.
Fig. 6. Remove four engine mounting screws (69),
lock nuts (82) and engine (3).
NOTE: All service to the engine must be performed by
an authorized HONDA dealer.
Fig. 6
ti657a
A
69
34
71
70
82
3
129
130
125
Installation
1.
Fig. 6. Remove four engine mounting screws (69),
lock nuts (82) and engine (3). Torque to 200 in-lb
(22.6 N
S
m).
2.
Install four washers (71) and cap screws (70).
3.
Fig. 5. Connect all necessary wiring.
4.
Fig. 7. Install set screw (A) in flexible coupling
(34).
5.
Install coupler guard (125) with cap screw (129),
and lock nut (130).
