Operation
309495L
5
Setup
Connect Gun to Sprayer
Make sure sprayer is turned off and
unplugged from power source. Refer to your
sprayer instruction manual for priming and
spray instructions.
1.
Attach Graco airless hose to sprayer
fluid outlet.
2.
Attach other end of hose to gun swivel.
Use two wrenches (one on the swivel
and one on the hose), to tighten all
connections securely.
3.
Refer to sprayer instruction manual for
priming instructions.
Installing Tip and Tip Guard on Gun
To prevent spray tip leaks make certain spray
tip and tip guard are installed properly.
1.
Perform
2.
Engage trigger lock.
3.
Verify spray tip and tip guard parts are
assembled in the order shown.
a.
Use spray tip to align gasket and
seal in the tip guard.
If equipment has recently been operated,
perform
page 4, and engage trigger lock. To avoid
serious injury from skin injection, do not
place your hand in front of the spray tip
when installing or removing the spray tip.
High-pressure spray is able to inject toxins
into the body and cause serious bodily
injury. Do not stop leaks with hand or rag.
ti29241a
SPRAY TIP
RUBBER
GASKET/METAL
SEAL
RETAINING
NUT
TIP GUARD
ti29242a
