Graco HydroShield WABH00, Инструкция - Каталог запасных частей

Страница: 62 / 142

Setup Menus
Maintenance Maintenance Maintenance 6: 6: 6: Output Output Output Resets Resets Resets and and and Test Test Test
Use this screen to view system output counts, reset
those counts, and test the output. Install kit 24Z226
to use this feature.
For details, see
Install the Optional System Status Output, page 26 .
System System System Status: Status: Status: The system status output, which tells
an external device if the system has an error or is off.
Unchecked box: Output off; indicates a system error
or the system is off.
Checked box: Output on; indicates that the system is
ready or active.
ES ES
ES Enable:
Enable:
Enable: The ES enable output, which sends out
a pneumatic and electrical signal used to turn on
electrostatics.
Low Low Low Paint: Paint: Paint: The low paint output which makes an
electrical connection to signal that the system is low
on paint.
Maintenance Maintenance Maintenance 7: 7: 7: Isolation Isolation Isolation Valve Valve Valve Maintenance Maintenance Maintenance
Use this screen to view isolation valve actuation
counts and reset those counts. The counters are
useful to monitor solenoid, air cylinder, or bearings
use.
The cycles increase each time the isolation valve
engages. Each item can be reset at different times,
based on maintenance schedules.
Isolation Isolation
Isolation Valve:
Valve:
Valve: Monitors each time the isolation
valve engages.
Isolation Isolation
Isolation Valve
Valve
Valve Seal:
Seal:
Seal: Monitors the life of the fluid
seals in the isolation valve assembly.
Wash Wash Wash Fluid: Fluid: Fluid: Monitors the life of the wash fluid. The
wash fluid keeps the isolation valve seal clear from
material.
62 3A8492A