Graco HVLP Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 18

Graco HVLP Скачать руководство пользователя страница 4

4 309241

General Information

Unpacking

Unpack the compressor/cart from the shipping carton
and inspect for shipping damage. If anything is dam-
aged, call your distributor.

The contents of the ProCart HVLP Compressor/Cart
are as follows:

D

Cart with compressor

D

30 foot material hose

D

24” compressor air hose

D

HVLP–T turbine spray gun (model 23422 only)

D

This instruction manual

HVLP Compressor/Cart Information

The ProCart HVLP Compressor/Cart provides air
pressure to a 2

1

/

2

-gallon remote pressure pot or to a

2-quart remote pressure pot. Fluid under pressure is
propelled from the pressure pot to the turbine spray
gun.

HVLP System Operation

The ProCart HVLP Compressor/Cart, turbine sprayer,
and turbine spray gun comprises the HVLP system.
The HVLP system can spray most coatings or finishes
currently being used for automotive refinish, industrial,
aerospace, marine, wood, plastic, and architectural
applications.

The spray gun of the HVLP system utilizes inbound air
pressure from the compressor/cart and HVLP turbine
sprayer to produce a high-quality paint finish. The
spray gun produces a cone of air that carries and
directs paint from the gun to the surface with minimum
overspray. Application is easy because only a few
passes are required to obtain coverage. Increased
system transfer efficiency reduces material require-
ments and clean-up time. The system complies with
clean air laws for reduced volatile organic compounds
(VOC) emissions.

See HVLP Turbine Sprayers manual 309240 for infor-
mation on the operation and use of the HVLP turbine
sprayer. See the HVLP–T Turbine Spray Gun manual
309205 for information on operating the turbine spray
gun.

Various configurations of HVLP compressor/carts,
turbine sprayers, guns, and accessories are available
to meet specific application requirements.

ProCart HVLP Compressor/Cart Components Table

ProCart

Material Hose

Compressor Air Hose

HVLP Turbine Spray Gun

233441

240476

240074

none

233442

240476

240074

244118

«
...
2
3
4
5
6
...
»

Содержание HVLP



















Отзывы:

Нет отзывов