14 309241
Repair
WARNING
Turn off turbine and unplug power for the following procedures.
Compressor/Cart Switch Replacement
See Fig. 9, Fig. 10, and
Parts Drawing
on page 16.
1.
To remove compressor power switch (28), wedge
large flat blade screwdriver between top of switch
and cart face plate.
2.
Push down firmly on switch. Pry switch out far
enough so two top switch locking tabs (A) are
visible.
3.
While maintaining outward pressure on switch,
push down on two locking tabs with small flat
blade screwdriver until they release. Switch will
pop out.
4.
Disconnect two wires and remove switch.
5.
Reinstall by connecting wires to new switch. Snap
switch into place.
Fig. 9
A
28
7936A
Compressor Replacement
See Fig. 10, Fig. 11, and
Parts Drawing
on page 16.
1.
Remove four cart grill plate screws (23). Remove
cart filter (9) and compressor duct (10). Clean or
replace filter as necessary.
2.
Remove air hose (12) from compressor.
3.
Remove screws (11) attaching compressor.
4.
Disconnect motor wires and remove compressor.
5.
Install new compressor and connect motor wires.
6.
Reinstall hose on compressor.
7.
Reinstall compressor duct and cart filter.
Power Cord Replacement
See Fig. 10 and
Parts Drawing
on page 16.
1.
Remove four cart grill plate screws (23), and
remove cart filter (9). Clean or replace filter as
necessary.
2.
Replace power cord (29).
3.
Reinstall cart filter.
7930A
Fig. 10
9, 23
28
Fig. 11
power cord
rocker switch
Motor
Compressor Wiring