Graco Husky 2200F, Инструкции по эксплуатации

Страница: 22 / 24

Technical Data
Technical Data
Husky 2200 Diaphragm Pump
US Metric
Maximum fluid working pressure 125 psi 0.86 MPa, 8.6 bar
Air pressure operating range 20 to 125 psi 0.14 to 0.86 MPa, 1.4 to 8.6 bar
Air inlet size 3/4 in. npt(f)
Air exhaust size 1 in. npt(f)
Fluid inlet and outlet size (ANSI/DIN
flange)
2 in 50 mm
Maximum suction lift (reduced
if balls don’t seat well due to
damaged balls or seats, lightweight
balls, or extreme speed of cycling)
Wet: 31 ft
Dry: 16 ft
Wet: 9.4 m
Dry: 4.9 m
Maximum size pumpable solids 3/8 in. 9.5 mm
Minimum ambient air temperature
for operation and storage.
NOTE: Exposure to extreme low
temperatures may result in damage
to plastic parts.
32° F 0° C
Air consumption
Standard diaphragms
70 scfm at 70 psi; 100 gpm 2.0 m
3
/min at 0.48 MPa, 4.8
bar, 379 lpm
Overmolded diaphragms 75 scfm at 70 psi, 100 gpm 2.1 m
3
/min at 0.48 MPa, 4.8
bar, 379 lpm
Maximum air consumption
Standard diaphragms
140 scfm
4.0 m
3
/min
Overmolded diaphragms 157 scfm 4.4 m
3
/min
Noise (dBa)
Sound power measured per ISO-9614–2. Sound pressure was tested 3.28 ft (1 m) from equipment.
95.2 at 70 psi and 50 cpm 95.2 at 4.8 bar and 50 cpm
Sound Power
101.8 at 100 psi and full flow 101.8 at 7.0 bar and full flow
87.3 at 70 psi and 50 cpm 87.3 at 4.8 bar and 50 cpm
Sound Pressure
94.7 at 100 psi and full flow 94.7 at 7.0 bar and full flow
Fluid flowper cycle
Standard diaphragms
1.6 gallons 6.1 liters
Overmolded diaphragms
1.3 gallons 4.9 liters
Maximum free-flowdelivery
Standard diaphragms
200 gpm 757 lpm
Overmolded diaphragms 200 gpm 757 lpm
22 3A2578C