background image

308368

21

Repair Kit Matrix

For Husky 2150 Aluminum and Stainless Steel Pumps, Series A

Repair Kits may be ordered separately. To repair the air valve, order 

Part No. 236273

 (see page 22). Parts included

in the Air Valve Repair Kit are marked with a symbol in the parts list, for example (4

{

).

To repair the seats, balls, and diaphragms, select the six digits which describe your pump from the following matrix,
working from left to right. The first digit is always 

D

, and the second digit is always 

0

 (zero). The remaining four

digits define the materials of construction. Parts included in the kit are marked with an asterisk in the parts list, for
example (201*).

For example, if your pump has polypropylene seats, Teflon

R

 balls, and Teflon

R

 diaphragms, you need to order

Repair Kit 

D 0 F  9 1 1. 

The digits in the matrix 

do not

 correspond to the ref. nos. in the parts drawing and lists

on pages 22 and 23.

Diaphragm
Pump

Null

Shaft O-Ring

Seats

Balls

Diaphragms

D (for all pumps)

0 (for all pumps)

F (Teflon

R

)

0 (null)

0 (null)

0 (null)

1 (not used)

1 (Teflon

r

)

1 (Teflon

r

)

2 (not used)

2 (acetal)

2 (not used)

3 (316 sst)

3 (not used)

3 (not used)

4 (17–4 PH sst)

4 (440C sst)

4 (not used)

5 (Hytrel

r

)

5 (Hytrel

r

)

5 (Hytrel

r

)

6 (Santoprene

r

)

6 (Santoprene

r

)

6 (Santoprene

r

)

7 (not used)

7 (not used)

7 (not used)

8 (Viton

r

)

8 (Viton

r

)

8 (Viton

r

)

9 (Polypropylene)

G (Geolast

r

)

G (Geolast

r

)

G (Geolast

r

)

Extension Conversion Kit

To convert an existing 2150 Aluminum pump to an extended version, use conversion kit 234019.

Содержание Husky 2150































Отзывы: