Technical Data - 1590
40
309528L
Technical Data - 1590
Santoprene® is a registered trademarks of the Monsanto Co.
Loctite® is a registered trademark of the Loctite Corporation.
*Displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type.
**Noise levels measured with the pump mounted on the floor, using rubber feet. Sound power measured per
ISO Standard 9614-1.
***The pump user must validate that the construction materials meet their specific application requirements.
Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . 120 psi (0.8 MPa, 8 bar)
Air pressure operating range . . . . . . . . . . . . . . . . . . . . . . 20-120 psi (0.14-0.8 MPa, 1.4-8 bar)
Maximum air consumption . . . . . . . . . . . . . . . . . . . . . . . . 125 scfm
Air consumption at 70 psi/20 gpm . . . . . . . . . . . . . . . . . . 50 scfm (see chart)
Maximum free-flow delivery . . . . . . . . . . . . . . . . . . . . . . . 100 gpm (378.5l/min)
Maximum pump speed . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 cpm
* Gallons (Liters) per cycle . . . . . . . . . . . . . . . . . . . . . . . . 0.5 (1.9)
Maximum suction lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ft (5.48 m) wet or dry
Maximum size pumpable solids . . . . . . . . . . . . . . . . . . . . 3/16 in. (4.8 mm)
** Maximum Noise Level at 100 psi, full flow . . . . . . . . . . 94 dBa
** Sound Power Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 dBa
** Noise Level at 70 psi and 50 cpm. . . . . . . . . . . . . . . . . 72 dBa
Maximum fluid operating temperature is based on the fol-
lowing maximum diaphragm, ball, and seat temperature
ratings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PTFE 220°F (104.4°C)
Santoprene® 180°F (82.2°C)
Buna-N 180°F (82.2°C)
fluoroelastomer 250°F (121.1°C)
Stainless steel 250°F (121.1°C)
Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 in. npt(f)
Fluid inlet size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 in.Sanitary flange
Fluid outlet size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 in.Sanitary flange
Wetted parts
***All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR)
Title 21, Section 177.
Wetted materials on all models . . . . . . . . . . . . . . . . . . . .
Wetted material depending on model. . . . . . . . . . . . . . . .
316 SST, PTFE
316 SST, PTFE, Santoprene®, Buna-N (Nitrile), V
Note: Santoprene® may be used only with non-fatty, non-oily foods or alcohols up to 15%.
Non-wetted external parts . . . . . . . . . . . . . . . . . . . . . . . .
Painted aluminum, 300 series stainless steel, polyester
(labels), Santoprene® (gasket), LDPE foam (gasket)
Weight
Models with aluminum center sections. . . . . . . . . . . . . . . 72 lb. (32.7 kg)
Models with stainless steel center sections . . . . . . . . . . . 86 lb. (40.0 kg)
