All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
This manual contains English. MM 312507 GJ30008
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441
Copyright 2009, Graco Inc. is registered to ISO 9001
www.graco.com
3/2009
Installation Instructions
1.
Locate hole or drill and ream a 5/8” hole in frame
rail.
2.
Mount module through hole in frame with lock
washer against hex on stud. Do not overtighten.
3.
Outer “S” cam bushings require less grease than
the inner bushings. Make sure the blue lines go to
those points.
If there is only 1 grease fitting per “S” cam, use the
black lines. Remove meters in ports 3 and 10 and
plug with manifold plugs in Pump Kit.
4.
Cut main line and insert the “tee” supplied in the kit
or install another connector into one of the three
inlets in the module. This module can be in line with
others or at the end of line depending on the appli-
cation and location of the axle.
Graco Information and Warranty
Please contact Graco Customer Service for all inquiries regarding service, replacement parts and warranties.
For the latest information abour Graco products, visit www.graco.com
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.
Phone: 612-623-6928 or Toll Free: 1-800-533-9655, Fax: 612-378-3590
6
5
4
3
2
1
7
1
1
1
1
1
1
11 12
8
9
10
ti13497
Drop Axel
563856
Frame Rail