20
Re-Assemble
All parts underlined are contained in Repair Kit.
1.
Soak P/N
GC0872 in a light weight, non detergent
oil, then install in P/N GC0711.
2.
Install P/N
GC0868, push down and install Snap
Ring P/N GC0015 in groove.
3.
On bottom side of P/N GC0711 install
P/N
GC0745 so that the lip faces out
4.
Lubricate and install O-Ring, P/N
GC0049 on
bottom groove.
5.
Install P/N GC0237 with lip facing toward the seal
P/N GC0745.
6.
Place P/N
GC0745
Seal and P/N GC2291 guide on
P/N GC0746. The lips of the Seal will face away from
P/N
GC2291.
7.
Set P/N 21803-00 spring in P/N GC0746 housing and
set GC2278 ball on Spring.
8.
Apply blue lock-tite to the threads of P/N GC0747 and
install on P/N GC0746. Tighten these two parts!
Section 1 - General Information: Maintenance
