308487
15
Operation
Viewing Totals and the Calibration Factor
This is the procedure for viewing the non-resettable
and resettable totals in the current units and for view-
ing the calibration factor.
1.
If the display is blank, press the Total button to
wake it up. If the display is already awake, go to
step 2.
The Standard mode display is shown.
2.
Press the Total button.
The non-resettable total amount is shown on the
display in the current units, as shown below.
06044
GAL
TOTAL
Maximum Working Pressure: 70 bar (1000 PSI)
Min. Dispense Volume
0.5 liter
(0.13 gal)
Minimum Flow Rate
1.0 l/min.
(0.26 gpm)
Maximum Flow Rate
15.0 l/min.
(3.26 gpm)
3.
Press the Total button again.
The resettable total amount is shown on the display in
the current units, as shown below.
06044
R-TOTAL
GAL
Maximum Working Pressure: 70 bar (1000 PSI)
Min. Dispense Volume
0.5 liter
(0.13 gal)
Minimum Flow Rate
1.0 l/min.
(0.26 gpm)
Maximum Flow Rate
15.0 l/min.
(3.26 gpm)
4.
Press the Total button again.
The calibration factor is shown on the display, as
shown below.
06044
CAL
Maximum Working Pressure: 70 bar (1000 PSI)
Min. Dispense Volume
0.5 liter
(0.13 gal)
Minimum Flow Rate
1.0 l/min.
(0.26 gpm)
Maximum Flow Rate
15.0 l/min.
(3.26 gpm)
5.
Press the Reset button.
The unit returns to Standard dispense mode, and the
Standard mode display is shown.
Содержание EM5 238457
Страница 8: ...8 308487 Notes ...