Graco EcoQuip 2 EQ200t Elite, Инструкция по эксплуатации

Страница: 26 / 70

Operation
26 3A7467C
Standby
1. Close the abrasive ball valve (M).
2. Turn the selector valve (W) to OFF.
3. Open the pot dump valve (J) until the pot pressure
gauge reaches 0 psi.
Shutdown
1. When you have finished blasting, use the wash
feature to flush all abrasive from the blast hose. See
Use the Wash Feature , page 25.
2. Turn the selector valve to OFF, and with the
abrasive ball valve closed, continue to blast until
water is cleared from the hose. This is to dry the
inside of the hose for storage.
3. Perform the Pressure Relief Procedure procedure,
page 19.
NOTICE
To prevent material from packing out and damaging
the blast hoses, do not shut off your air compressor
during Standby.
WLD
M
WLD
W
WLE
J
WLD